Simple UselessBox Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple basic enclosure for a uselessbox. It uses one single 9G servo and can hold a 9V battery for powering.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple basic enclosure for a uselessbox. It uses one single 9G servo and can hold a 9V battery for powering. There is enough space to place little PCBs or put the wiring for the useless box inside. My box is powered by a Attiny13 which gives the ability to run nine differnent programs to turn off the switch. This gives the box a moody personality :-)
The design is very easy, needs no support to print and only has small overhangs which are easy to print.
Youtube: https://youtu.be/ycmA8jxt45w
Firmware for the Attiny can be found here: https://github.com/ringo2k/uselessboxfirmware
Connect the Servo PB0 and the switch to PB4 and thats it (more in the README).
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/7OvPWIVaO2F
Category: 3D Printing