PiggyBank
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Piggy and Boar cubes for your savings
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 127
- Makes
- 2
- Views
- 624
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
More PiggyBanks:
https://www.printables.com/@C47_3d/collections/1538446
Piggy Bank Vault:
https://cults3d.com/en/3d-model/home/piggy-bank-safe-c47
---
100x100x109mm
No supports needed
No glue needed for assembly
Eyes and a smile will snap together with base model
Original models are with a lid (printed separately) but there is a version without it too (you will need to break a piggybank to get the money then)
If you don't have a good cooling on your printer you can print a base and a face separately - use PARTS files then
Face should snap in to base model but those models were not print tested. In the worst case you will need to use a glue
---
Made for 0.4mm nozzle
Unless your slicer has an automatic option to add inner supporting bridges (like in PrusaSlicer) you may need some infill - 10-15% should be fine then
Printed with 2 walls and 0.2mm layer height
---