Fish Lip Gripper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grab fish without hurting your fingers
- Rating
- 4.636 / 5
- Likes
- 856
- Downloads
- 1,251
- Makes
- 12
- Views
- 15,501
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Summer
- License
- Creative Commons — Attribution — Noncommercial
Print with PETG or ASA.
4-5 walls minimum - high infill recommended (especially for “Beam”)
Hardware:
4x M3 hex socket screws (M3*14)
4x M3 nuts
"Top" and "Handle" require supports on the inside. There is a 1mm clearance on there so left over support segments will not interfere with movement of other parts, although i suggest using PVA as a support interface.
Use color painting (or equivalent) for “Top”
(xenomorph looking thing lol)
Intended Usage:
“Spring Top” contains hole for a spring:
Diameter: 6mm // length 16mm (use a longer spring and pre-compress it)
Nuts are press-fit, but may have to be heat-set if your printer tolerances arent perfect