Climbing Bolt Hangar Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ever want to practice anchor building at home? This bracket is for mounting climbing bolt hangars into plywood or lumber
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 22
- Makes
- 1
- Views
- 359
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This design uses added internal perimeters to increase the print strength. I cannot recommend using this to hold body weight, but with the right materials and print settings, I (220lbs) was able statically hang off of one. If you aren't planning on weighting it, print settings don't really matter.
The bracket is sized for:
1x ½" bolt hangar
1x ½"x1.25" hex head bolt
1x ½" washer
1x ½" nylock nut
4x ¼" lag bolts (length depend on how you mount it)
4x ¼" washers
Any climbing hardware is up to you, go crazy!
Print settings:
PETG
.4 mm nozzle
.3 mm layer height for strength
4 perimeters minimum
5 top/bottom layers minimum
15% infill, cubic or gyroid
.stp file available at request, please attribute if you remix.