Climbing Bolt Hangar Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ever want to practice anchor building at home? This bracket is for mounting climbing bolt hangars into plywood or lumber
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 359
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This design uses added internal perimeters to increase the print strength. I cannot recommend using this to hold body weight, but with the right materials and print settings, I (220lbs) was able statically hang off of one. If you aren't planning on weighting it, print settings don't really matter.
The bracket is sized for:
1x ½" bolt hangar
1x ½"x1.25" hex head bolt
1x ½" washer
1x ½" nylock nut
4x ¼" lag bolts (length depend on how you mount it)
4x ¼" washers
Any climbing hardware is up to you, go crazy!
Print settings:
PETG
.4 mm nozzle
.3 mm layer height for strength
4 perimeters minimum
5 top/bottom layers minimum
15% infill, cubic or gyroid
.stp file available at request, please attribute if you remix.