1 / 2
Atari XL Cartridge Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This cartridge case fits boards similar to A8 Pico Cart
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 120
- Makes
- 0
- Views
- 458
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
This cartridge case fits boards similar to the A8 Pico Cart. The case is made such that it provides a comfortable grip and easy access to the reset button on the front. You're going to need 2 M3x18mm screws to assemble the case. The button part is only necessary if you don't have momentary switches with a long stem readily available.
Print Settings
- No supports (if you have issues with the back screw holes, add some small support material to the holes only)
- No Brim
- 0.2 mm layer height
- 3 wall loops
- 6 top shell layers
- 6 bottom shell layers