Manta M8P/CM4- Antenna Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clean solution for mounting an actual antenna for the CM4 on your Manta M8P
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 34
- Makes
- 0
- Views
- 314
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
Wanted a nice clean solution for mounting an actual antenna for the CM4 on my Micron. Originally had a skirt mounted solution but it had two flaws:
1. Only worked with Micron R0 skirts
2. Every now and then the antenna would get snagged on something while moving my printer to service/work on it.
So I decided to move it back into the elec compartment and came up with this for use with Manta M8P. It will ONLY work in the corner shown in the pic by the CM4. The mounting holes at each corner of the M8P have different distances from the outer edges of the board so it wont fit in on other corners.
Required supports are built into the model.
Requires: M3x6 screw to secure down over the corner of the board.