1 / 2
QRP Labs Dummy Load Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case to contain the QRP Labs 20W Dummy Load.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 84
- Makes
- 2
- Views
- 522
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a small snap together case to contain the QRP Labs 20W Dummy Load. There are locating pins and standoffs that fit into the holes of the circuit board. These pins are rather small and care should be taken when inserting the dummy load into the case.
This can be printed laying flat with no support, although I did print with buildplate supports to help with the inset text on the lid. It was designed to be printed with a .2mm layer height.
The case in the photo was printed using PolyMaker PolyTerra Black PLA.