Metal Storage Shelf RPi + 7" Screen Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
7" Touchscreen + RPi mounts for standard metal garage shelving units (no drilling). Great for Klipper / MainsailOS users
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 13
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I needed a mount for my klipper pi's so I made this. It's low profile on the top, so it won't interfere with the removal/installation of the printer for maintenance or otherwise intrude on your workspace.
I didn't want to drill anything, so they use a dovetailed top clip to mount onto the shelving unit.
I printed mine in PLA+, as they are in an controlled environment (so no worries about heat) but they do get hip-checked from time to time. No issues yet, although I have ‘bellied’ the emergency stop on mainsail once or twice now. Print at .2 or less for strength, and you will need to print a dovetail clip for the left and right side. Uses M3 screws to mount to the touchscreen mount points - be careful not to over-torque the screws as they may damage the LCD if they apply too much pressure.