Metal Storage Shelf RPi + 7" Screen Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
7" Touchscreen + RPi mounts for standard metal garage shelving units (no drilling). Great for Klipper / MainsailOS users
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a mount for my klipper pi's so I made this. It's low profile on the top, so it won't interfere with the removal/installation of the printer for maintenance or otherwise intrude on your workspace.
I didn't want to drill anything, so they use a dovetailed top clip to mount onto the shelving unit.
I printed mine in PLA+, as they are in an controlled environment (so no worries about heat) but they do get hip-checked from time to time. No issues yet, although I have ‘bellied’ the emergency stop on mainsail once or twice now. Print at .2 or less for strength, and you will need to print a dovetail clip for the left and right side. Uses M3 screws to mount to the touchscreen mount points - be careful not to over-torque the screws as they may damage the LCD if they apply too much pressure.