Simplest re-spooler for filament winder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the simplest and fastest to print re-spooler system for a drill
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 91
- Makes
- 0
- Views
- 1,771
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is the simplest and easiest to print adapter for re-spooling filament on an empty spool. You will need:
- 2 pcs of this print
- 1 M6 x 80 or M6 x 100 mm screw (lenght is not crucial - it has to be around 20-30 mm longer than the width of the spool)
- 1 M6 hex (simple/normal) nut
After printing the 2 plastic parts, insert the screw in one of the parts and than thru the spool. Insert the nut in the other printed part (they are identical) and tighten the spool as much as you want or just enough for the spool not to slip. The remaining thread of the screw use it to grab it by the drill's chuck.
Here you have it!