Fractal Ridge Bracket / under desk mount

****NOT TESTED AS MOUNT****
### USE AT YOUR OWN RISK ###

This is a model that I made partially for fun. I wanted to design my own PC mounting solution for Fractal Design Ridge case.

I used PETG to ensure that the bracket will not soften because of the heat that computer is producing. I literally used whatever I had lying around that's why you may come across different insert and screw sizes, mainly M4 and M5 but also some M3s.

The whole thing is solid but has a little wobble to it. I designed it with a thought of adding some fabric/foam/tape between the bracket and PC so it will not scratch.

How to assemble?
- Print all the parts they printable on A1 Mini (don't ask me how I know…) 
- Heat up your soldering iron and add Insert into all the holes
- Firstly mount the smallest pieces at the bottom of the case as feet
- Next screw all the parts together as tight as you can (Leave support beams for later)
- When brackets have correct shape just slide them onto the Fractal Ridge Case (handles on top)
- Align the bracket with bottom feet and use screws to fix them together
- Next add support beams at the top with the screws
- And you are done! 

You can also use steel angle brackets at the top ( I designed the model to specifically use 50x50x15mm ones with around 2mm of thickness )

****NOT TESTED AS MOUNT****
### USE AT YOUR OWN RISK ###