Fishing Pole Garage Storage -- REV 2 OUT NOW ON MY PROFILE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This design is to store fishing rods on the back of a garage door and keep them out of the way when the door moves
- Rating
- 4.857 / 5
- Likes
- 227
- Downloads
- 780
- Makes
- 9
- Views
- 5,972
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
NOTE: REV 2 AVAILABLE HERE --> https://www.printables.com/model/1709622-fishing-pole-garage-door-hanger-rev2
BETTER CLEARANCE WITH HINGE PIN
OPTIMIZED SPACING FOR SPINNING REELS
OPTIMIZED SIZING FOR STANDARD 256mm BED SIZES
This is my first model for Printables. We have several sets of fishing rods in our family and needed somewhere safe to store them.
The clip for the garage door hinge is sized for a 15mm hinge diameter, this may need to be modified to your specific door.
I recommend using the two pole variant for fly rods or spinning rods. The three pole variant works well for spinningcast and baitcast equipped rods.
So far tested with PETG using 0.2mm layer height, 3 walls, 3 top/bottom layers, and 15% grid infill.
Can fit one set (two hangers) on a 180mm bed if you rotate each hanger by 15 degrees. Printed on a Bambu A1 mini.