Razer Seiren Mini V3 Extender
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shortend thread because it was to long on the org.
- Rating
- 4.5 / 5
- Likes
- 10
- Downloads
- 196
- Makes
- 1
- Views
- 780
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
I printed this in some basic Elegoo black PLA with a 0.16 layer height and 4 walls. For infill, I would recommend 10% to 20%, which is enough.
As seen in the picture, I went for a lower infill because I was nearly running out of filament.
Your printer should be well-tuned, as the threads are quite snug. I would not recommend putting the seam to the "back" (which is kind of hard to determine on a cylinder shape) because the seam will be directly at the front of the microphone when screwing everything in. This might be visible in the photos.
I might print it again in some matte filament to fix the seam and to make it match the microphone's black color a bit more, even though this version is quite similar.
Enjoy!