Razer Seiren Mini V3 Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shortend thread because it was to long on the org.
- Ocena
- 4,5 / 5
- Polubienia
- 10
- Pobrania
- 196
- Wydruki
- 1
- Wyświetlenia
- 780
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed this in some basic Elegoo black PLA with a 0.16 layer height and 4 walls. For infill, I would recommend 10% to 20%, which is enough.
As seen in the picture, I went for a lower infill because I was nearly running out of filament.
Your printer should be well-tuned, as the threads are quite snug. I would not recommend putting the seam to the "back" (which is kind of hard to determine on a cylinder shape) because the seam will be directly at the front of the microphone when screwing everything in. This might be visible in the photos.
I might print it again in some matte filament to fix the seam and to make it match the microphone's black color a bit more, even though this version is quite similar.
Enjoy!