Vintage Carbon Microphone
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A vintage carbon mic, used onstage. This is NOT a functional microphone - it is a prop. Threaded to fit a mic stand.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 210
- Makes
- 1
- Views
- 1,281
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
A vintage carbon mic, used onstage. This is NOT a functional microphone - it is a prop. This has a threaded base, that screws on to a standard microphone stand (5/8"-27) and fits nicely. The front and back halves are glued together, and the ring is glued to the base. The springs were purchased at a hardware store. The whole thing was then painted. Modeled in Fusion 360.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
No
Supports:
Yes
.2
Infill:
15%
Notes:
I did use supports under the little rings on the inside of the big ring. Just a basic PLA - I often use Hatchbox, but I am not sure what brand I used.
Category: Props