Vevor Fume Extractor Hose Clip for Switch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hose clip to hold a switch near the head of the hose for easy access to turning it on and off
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I made this after watching a video about the fume extractor and the video maker made a mod to have a switch near the head of the unit on the hose. So since the design was not made available I made my own. To open the damn extractor I used a Torx8 driver and to remove the 4 screws for the pcb you will require a "Stubby" Philips screw driver. I am including a picture of the PCB with the solder points for the wires, solder 2 long wires to these and assemble the unit and pull the cables to the outside using the exhaust vent on the bottom of the unit.
The Video that shows the mod is here
It uses these switches from Amazon
https://www.amazon.com/dp/B0752RMB7Q