1 / 5
CWWK X86-P5 Devboard Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the CWWK x86-P5 development board.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 236
- Makes
- 0
- Views
- 2,705
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Print settings:
- Material: PETG, ABS, or ASA
- Layer height: 0.25mm
- Wall loops: 3
If you want to have the honeycomb holes for ventilation, like how I have in the photos, add a modifier to the first 2.5mm with the following settings:
- Infill: Honeycomb 20%
- Top/bottom layers: 0
- Wall loops: 8
There are two variants of the case:
- Rev 1.1: With red USB ports and an FPC cable.
- V3: With blue USB ports and a twisted power cable.
Mine is Rev 1.1 and the case fits quite nicely. However, since I do not have access to the V3 model, I can not test if it fits. If you have the V3 model, feel free to provide the dimensions and I will update the models.
BOM:
- Four M3 brass inserts
- Four M3x6 countersunk screws
- Four M2x6 countersunk screws
- (Rev 1.1 only) Two more M3 brass inserts and two flat head M3x6 screws for the retention bracket.