1 / 1
Qidi Xmax3 Super pinda mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for Super pinda inductive sensor
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 466
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The original Qidi inductive probe failed on my printer and i had a Super pinda laying around from another project.
Dimensions have been taken from the original Qidi mount, so no need to edit the printer.cfg as the X/Y offset is the same.
You will need to crimp new connectors on, since Qidi has split the connections into two plugs instead of the single 3 pin connector that the Pinda uses.
Wiring also has to come in from the top instead of the bottom due to the length of the sensor.
Print the mount in ABS or something more heat resistant