Free Toys-shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I likes KYZ's original design, but I wanted a shelf that could be used with zip ties instead of screws.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 35
- Makes
- 0
- Views
- 668
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
I appreciated KYZ Design's original shelf concept, but I preferred using zip ties instead of screws, so I added four 4 mm holes.
I intend to use the shelf as designed and give away free 3D printed toys at our local playground near our house. I left it without text so you can add it as a modifier in the slicer yourself.
I print mine with a 0.6 mm nozzle and use a layer height of 0.25 mm in PETG. For the text, I raise it by 1 mm and add a color change at the last layer of the text since I don't have an MMU. This will result in one layer of the entire shelf being a different color, but I don't mind.
The one in the picture is also about 25% bigger in width and height and the shelf is about 33% bigger to fit more or bigger toys.