Free Toys-shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I likes KYZ's original design, but I wanted a shelf that could be used with zip ties instead of screws.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 668
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I appreciated KYZ Design's original shelf concept, but I preferred using zip ties instead of screws, so I added four 4 mm holes.
I intend to use the shelf as designed and give away free 3D printed toys at our local playground near our house. I left it without text so you can add it as a modifier in the slicer yourself.
I print mine with a 0.6 mm nozzle and use a layer height of 0.25 mm in PETG. For the text, I raise it by 1 mm and add a color change at the last layer of the text since I don't have an MMU. This will result in one layer of the entire shelf being a different color, but I don't mind.
The one in the picture is also about 25% bigger in width and height and the shelf is about 33% bigger to fit more or bigger toys.