Sunglasses
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sunglasses made to be indestructible.
- Rating
- 3 / 5
- Likes
- 10
- Downloads
- 147
- Makes
- 1
- Views
- 661
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
Recommendations:
0.2mm layer height
ABS+ layers 1-5
TPU 95A for the rest.
1.75mm still filament for the hinge
Dry your TPU! Tune your retractions!
These are sunglasses I remixed to be more to my liking. After breaking a pair on a rollercoaster, I set out to make an indestructible pair. Prints in TPU hold up extremely well, but are a tad floppy. Experimenting with ABS + TPU to add a bit of stiffness, as these materials bond well. I recommend ABS first then, at 0.2mm layer height, swap at layer 5 to TPU. This gives the TPU a large cross-section to bond to.
Update:
To add the hinge, use a stiff piece of 1.75mm filament and cut one end into the shape of a cone. Use a pair of pliers to then press it into the small holes