1 / 3
9.5mm DVD CDRom Cover plate - Flat Style - SSD Drive Caddy Bezel — image 1
1 / 3

9.5mm DVD CDRom Cover plate - Flat Style - SSD Drive Caddy Bezel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I had a 9.5mm SSD to DVD Rom caddy for my Dell M4500 I got from here:…

Rating
0 / 5
Likes
6
Downloads
58
Makes
0
Views
972
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

I had a 9.5mm SSD to DVD Rom caddy for my Dell M4500 I got from here:

http://www.newmodeus.com/shop/index.php?main\_page=product\_info&products\_id=451

It had an angular bezel as shown in the picture on the left. When I got an M4700, it used a flat bezel. Instead of spending the 45 bucks, and having to cut the LED off again since it was obnoxious, I just threw this together. Took around 4 prints to get it to fit right.

Turns this:
Model: slimSATA-eSATAp-C06
Into this:
Model: OBHD9-SATA-SATA-B

It might fit a generic SSD to DVD caddy that comes with no faceplate, but they are all different so you will have to modify the mounting holes. Included is the SLDPRT file. I also attached a step file.

Print instructions

Category: Computer Instructions

Print with no support and no rafts face down on the build platform. It will not need any supports since the holes are so small.

Tags