9.5mm DVD CDRom Cover plate - Flat Style - SSD Drive Caddy Bezel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a 9.5mm SSD to DVD Rom caddy for my Dell M4500 I got from here:…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 967
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a 9.5mm SSD to DVD Rom caddy for my Dell M4500 I got from here:
http://www.newmodeus.com/shop/index.php?main\_page=product\_info&products\_id=451
It had an angular bezel as shown in the picture on the left. When I got an M4700, it used a flat bezel. Instead of spending the 45 bucks, and having to cut the LED off again since it was obnoxious, I just threw this together. Took around 4 prints to get it to fit right.
Turns this:
Model: slimSATA-eSATAp-C06
Into this:
Model: OBHD9-SATA-SATA-B
It might fit a generic SSD to DVD caddy that comes with no faceplate, but they are all different so you will have to modify the mounting holes. Included is the SLDPRT file. I also attached a step file.
Print instructions
Category: Computer Instructions
Print with no support and no rafts face down on the build platform. It will not need any supports since the holes are so small.