1 / 3
inReach Mini 1 holder for Kriega backpacks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Semi permanent holder for inReach Mini 1 for Kriega backpacks
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 69
- Makes
- 0
- Views
- 513
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I needed something sturdy to keep the inReach Mini 1 on myself while riding my motorbikes off-road. I have two Kriega trail backpacks, so I decided to print a holder that will be using zip-ties to attach inReach to my backpacks.
You will need:
- 2x 4.5 mm zip ties (carry more if you need to reattach it)
- 1x countersunk bolt M4x6mm (apply a little bit of Loctite 243)
For printing I have used PETG, 0.20 mm QUALITY, 30 % Infill, 3 perimeter shells, no supports.
Please note you may need to cut the notch to be square after printing. I did not test this with Mini 2, but it might fit.