1 / 1
VEVOR Wireless Attic Lift Remote Control Box Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bracket meant to be laser cut from steel and then bent.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
The bracket attaches to one bolt on the top of the hoist (red) and then using two M6-1.0x1mm bolts the control box (yellow) attaches to the bracket. This will allow the control box to hand off the side of the unit.
The bracket should be cut from A36 Mild Steel with a thickness of .074" (1.9 MM).
