Hyundai Coupe/Tiburon - Dinamometer Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
In case you get a radio with screen and you don't want to loose the Dinamometer , you can use this print.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 61
- Makes
- 0
- Views
- 745
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Good day.
As said,
I got a new Radio with touch screen but to use it I had to remove completely the dinamometer with the consumption level and the battery check out . I really liked it as a accesory so I decided to make a rought model ( I am a very bad 3D modeler ) and make this . In any case , I am very happy with it and I hope this would make happy other Tiburon lovers.
Instructions:
**Print related:
*ABS model - car parts are exposed to a quite high temperature ;
*Part is provided as 3 pieces - for convenience when having a 220x220 build plate;
*Infill rate: 30% is enought;
**Car related:
*Cable wires - will have to be extended;
*Dinamometer - back white enclosure - will have to be removed for space economy;
*Feel free to request for additional information if needed - will do my best to come back to you.