1 / 3
Micron R1 Printers for Ants (PFA) - Powge 60T Pulley Z Drives — image 1
1 / 3

Micron R1 Printers for Ants (PFA) - Powge 60T Pulley Z Drives

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a mod for the Micron R1. The Powge 60T pulleys don't fit the R1 Z drives, these do.

Rating
0 / 5
Likes
5
Downloads
36
Makes
0
Views
530
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

This is a mod for the Micron Printers for Ants R1.

The Powge 60T pulleys don't fit the stock Z drives, these do. NOTE: Dont forget to update the gear ratio in your configs! The stock micron configs assume 62 teeth. 

Changes:

  • Screws moved 3mm to accommodate cut-out

  • Cut out 30mm diameter for Powge 60T Pulleys

  • Cut out on Motor parts for the pulley boss to clear.

Compatible with both 150mm and 152mm belts.

Tested with 16T drive pulley, should work with 20T but not recommended.

Full credit for original parts goes to hartk on Github, and the rest of the non-modified parts required are on the Printers for Ants Micron R1 page.

Micron/R1_Beta/STLs/Z_Drive at main · PrintersForAnts/Micron (github.com)

 

Tags