Micron R1 Printers for Ants (PFA) - Powge 60T Pulley Z Drives
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mod for the Micron R1. The Powge 60T pulleys don't fit the R1 Z drives, these do.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 528
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a mod for the Micron Printers for Ants R1.
The Powge 60T pulleys don't fit the stock Z drives, these do. NOTE: Dont forget to update the gear ratio in your configs! The stock micron configs assume 62 teeth.
Changes:
Screws moved 3mm to accommodate cut-out
Cut out 30mm diameter for Powge 60T Pulleys
Cut out on Motor parts for the pulley boss to clear.
Compatible with both 150mm and 152mm belts.
Tested with 16T drive pulley, should work with 20T but not recommended.
Full credit for original parts goes to hartk on Github, and the rest of the non-modified parts required are on the Printers for Ants Micron R1 page.
Micron/R1_Beta/STLs/Z_Drive at main · PrintersForAnts/Micron (github.com)