Wyniki wyszukiwania: 60t

60T GT2 pulley

60-tooth GT2 pulley with 5 mm bore. Support yes Print with 5 perimeters, infill 50%, filament PETG, layer 0.1 mm.

60th Birthday Cake Topper

60th Birthday Cake Topper

Garbage bins 1:87 H0 scale (Swedish 60th to 80th design)

Garbage bins in 1:87 H0 scale. Designed after typical Swedish garbage bins in the 60th to 80th. Visit my blog at: Enely's 3D Print instructions Try both with and without support. The prints in the picture are printed without support. (Not…

GT2 60tooth timing belt gear

This is for a 10mm axleshaft.

Spiral Staircase 1/60th

This is a 1/60th scale model of a spiral staircase. It was designed for DnD miniatures. The commissioner wanted it to look more like a wooden staircase, rather than stone, so I tried to make it as much of a frame as possible.

Birthday gift 60th

Nice sign to give for the 60th birthday. Printed in PETG with 10% infill. Width 20 cm/8" Category: Accessories

1/60th Scale Apollo Saturn V MLP base skin set

In order to save on filament to build farscape's MLP I created a set of skins which once printed are applied to a wooden box. Original model can be found here. https://www.thingiverse.com/thing:911891 These skins are sized to fit 220x220…

Timing Belt Pulley GT2 60t 6mm sleeve for 20t pulley for Voron Micron

Non Printed parts needed: * 5 x M3x8mm flathead screw (https://de.aliexpress.com/item/4001338395909.html) * GT2 20 tooth pulley 6-7mm width with removed cap (https://de.aliexpress.com/item/4001338395909.html) (You can remove the caps…

1/60th Scale MLP Engine Chamber Walls

If you are building the MLP using my skins attached to a wooden box, add the engine chamber simply by printing this wall four times. This version of wall has cutouts for the hold down arms.

Blast Shield 1/60th scale for Mobile Launch Platform.

Install this Blast Shield on deck (Level 0) of the MLP as seen in the included drawing.

1/60th scale Engineer

These engineers are intended to go with the 1960's era 1/60th scale Saturn V/LUT models.

1/60th Scale Apollo Saturn V MLP Support Interfaces

These Support Interfaces are used in conjunction with my 1/60th Scale Apollo Saturn V MLP skin set.

spiggytech EVGA 3060/3060TI Shroud replacement

This is a replacement shroud design for the EVGA 3060/3060TI XC with 2 fans. It will fit both Gaming and Black edition GPUs. I wanted a matching GPU to my Monolith rig, however, it seems there are no companies producing a Sub205MM GPU in…

BTT TMC 5160T / TMC5160T Plus w/o case - 3010 fan shroud + DIN rail mount adapter

For external stepper driver BTT TMC5160T PLUS V1.0 (w/o case) . Assembly Guide Fit [POS 2 - adapter] to [POS 3 - DIN rail bracket] using 2x [POS 6 - screw - M3x8] to create [sub assembly 1]. Fit [POS 5 - axial fan - 3010] to [POS 1 - fan…

Spektrum AR8020T or AR8360T receiver support

Supporting your receiver without glue Category: R/C Vehicles

spiggytech 3060/3060TI Single Fan Conversion Shroud to Slim 92mm Noctua Fan Mod

This project is in alpha testing. As such, it may have goofs and slight fitment gaps. I'm working on that as I acquire another GPU to test the fitting. Your feedback is highly valued in this stage Update 7/22/2023: Added a new assembly…

GT2 60teeth bore 5mm, belt width 10mm timing belt pulley

GT2 60teeth bore 5mm, belt width 10mm timing belt pulley Use M3 screw and nut for fitting.

BTT TMC5160T Pro AWD + MCU Board mounting bracket for Octopus and Manta M8P

This is a MCU Board mounting bracket for Octopus and Manta M8P that holds 4 BTT TMC5160T Pro drivers for AWD Mods/VZbot. BOM: 20X M3*4*5 Heat set inserts 20X M3*8 SHCS (If using the fan cases in the picture then 16X M3*10 and 4X M3*8) Two…

DIN mount for BTT Octopus pro + 4x BTT TMC5160t PLUS

Here’s a simple and effective DIN mount for the BigThree Tech Octopus Pro with 4 x 5160T Plus stepper drivers. In addition to holding the motherboard and stepper drivers, this mount also allows you to install 4 x 40mm fans to cool the…

BTT TMC5160T Plus Mount for VzBot (Retrofit)

This is a mount to retrofit 4x BTT TMC5160T Plus drivers onto the VzBot Mellow Super 8 Mount as designed by Simon Vez in place of the Melllow TMC5160 drivers. The mount elevates the drives sufficiently to clear most wiring channels. Add…

Bigtreetech TMC5160T Plus double DIN rail mount

Double DIN Mount BTT TMC5160T Plus Narrow DIN rail mount for two BTT TNC5160T Plus external stepper drivers using the Voron PCB DIN rail clips. BOM 8x M3x8 (SHCS or BHCS) 4x M2x8 selftapping screws (uses the standard Voron ones) 2x BTT…

60T GT2 Pulley, 6mm belt width, 6mm bore

Designed GT2 timing pulley for my EXOS II EQ5 OnStep mount with following specifications -- Number of teeth - 60 Pitch - 2mm Bore - 6mm Belt width - 6mm The pulley has two slots designed to fit M3 hexagonal nuts to assist in shaft…

Zotac 3060ti OC and nonOC noctua 92mm fan deshroud mod

Added: Some 3Dprinter friendly roundness features to corners Fillets to improve strengh Rmove ceilings for print without supports Countershunk holes for reuse original bracket radiator screws

V2A4 1/60th scale model

The V2 (from the German Vergeltungswaffe 2: "weapon of retaliation"), Aggregat 4 or A4, is a ballistic missile developed by Nazi Germany during the Second World War and launched in several thousand units in 1944 and 1945 against civilian…

0.8 MOD gear 60T, 30T & 54T (for ZWO EAF stepper motor)

ZWO EAF (Electronic Automatic Focuser) is popular among astro-photographers, becasue it works fine and is relatively inexpensive. However, once it is attached to the focuser-axis after removing the turning knob of focusers, one looses the…

Mellow Fly TMC5160TA Mount for DIN Rail Bracket & Fan Mount

This is a Mellow Fly TMC5160TA Mount for my DIN Rail Bracket. You can find the bracket here ! In addition I created a fan mount. The fan mount can be used without the rail mount. The fan mount is for 40mm fans. The printable spacer can be…

ERCF V2 Selector Power Drive 60T pulley Mod

A mod for Enraged Rabbit ERCF V2 MultiMaterial System. Use Pulley 60T and 20T (3:1) to drive the selector unit.

Spektrum AR8020T or AR8360T receiver and Freewing blue box support

Spektrum AR8020T receiver and blue box support without glue Category: R/C Vehicles

0.8 MOD gear 22T, 30T, 40T & 60T (for stepper motors fitted with hex shaft coupling connectors)

0.8 MOD gear 22T, 30T, 40T & 60T (for stepper motors fitted with hex shaft coupling connectors). I apply these gear wheels for focuser & rotator control of telescopes via ONSTEP ASCOM driver. One M4 flat-head (8mm in length) screw is…

ERCF V2 Selector Power Drive 60T pulley Mod NEMA17

Only modified to use a NEMA17 stepper motor ## BOM: * cnc 60T pulley (2GT, always 2GT type) * one more 20T pulley ( the same type of the ERCF original design for selector motor) * 154mm belt, (2GT close loop) * nylong washer M5 0.5mm…

Cake topper birthday 50th / 60th / 70th deer

Deer trophy topper for the 50th / 70th birthday cake. I shared also the FreeCAD file of my remix. Remix of https://www.printables.com/model/617644-hunting-birthday-topper Notes: Extrude height: 2mm Bed plate: Satin Powder-coated Steel…

360to280mm RAD Adapter FractalDesign Torrent

UPDATE 15.11.2013: Check out the slim version to fit a bit bigger GPUs: https://www.printables.com/de/model/648535-slim-fractaldesign-torrent-rad-adapter It is designed to be mounted to a 280mm Radiator and then with long enougth screws…

Ersatz-Gürtelclip für Binderberger Funkfernsteuerung T60TX-Series

DE: Dieser Gürtelclip wurde für die Binderberger Funkfernsteuerung T60TX-Series gezeichnet. Empfohlen wird dieses Teil aus widerstandsfähigem Material zu drucken, das es bei den Holzarbeiten hin und wieder rau her geht. Ich habe das Teil…

Stream Deck (V1) Vertikal Stand (Roland 60th Anniversary Edition)

Stream Deck (V1) Vertikal Stand

LG Soundbar S60TR rear speaker holder

I made a holder for my LG Soundbar S60TR rear speakers to use the existing screws I had on the wall, that were 8cm spaced. It holds any 10.3 cm wide volume and theres a hole for wiring in the bottom The project can be fount at:…

MIC Maono AU-PM360TR Shock Mount (2 parts only)

A 2 parts minimalist simple Shock Mount for Maono AU-PM360 Mic using its original mic stand. The original table mic stand has a lot of boom sound. Since I still prefer a table mic stand, adding a shock mount will be a perfect solution.…

Marui CJ-7 Golden Eagle / Landcruiser differential gear 60t

Main differential gear for Marui CJ7 Golden Eagle / Toyota Landcruiser Super Wheelie. 60 tooth. Print in ABS/Nylon for best strength. Print Settings Printer Brand: LulzBot Printer: Mini Rafts: Doesn't Matter Supports: Yes Resolution: 0,14…

Doctor Who 60th Anniversary Tardis

The 60th anniversary is in November of 2023, so I thought I'd celebrate that event with this model. I've included two sizes Tardis#3_&_100% (47.55 x 93mm).stl Tardis#3_&_200% (95mm x186mm).stl and PrusaSlicer created Colour Change. gcode…

Micron R1 Printers for Ants (PFA) - Powge 60T Pulley Z Drives

This is a mod for the Micron Printers for Ants R1. The Powge 60T pulleys don't fit the stock Z drives, these do. NOTE: Dont forget to update the gear ratio in your configs! The stock micron configs assume 62 teeth. Changes: Screws moved…

Topper para pastel – Happy Birthday 60th | Cake Topper – Happy Birthday 60th | 3D Print

Topper decorativo para pastel con el texto “Happy Birthday 60th” , ideal para celebrar un 60º cumpleaños de forma elegante y especial. Diseño limpio, moderno y fácil de imprimir , adecuado para cualquier nivel de experiencia en impresión…

Evolve hubs 60T pulley

Remixed the pulley to fit evolve hubs. You need M4x60mm bolts if you use 5mm spacer.

BTT tmc5160t Plus Remote Drivers 40mm fan shroud

I made this to go with https://www.printables.com/@TallBoy_436908 's BTT5160TplusMountVzBot.stl It uses 8xM3 heat inserts. Added a VZBot logo for my VZ330 build. If you would like a plain one let me know. Also made a shroud for just one…

BTT TMC5160T Plus + MCU Board mounting bracket for BTT Manta M8P V2.0

Remixed to fit my Voron 2.4 250 mm with 2x TMC5160T Plus and Manta M8P V2.0 board.

Porter Cable PC60THP Planer to Shop Vacuum Adapter

Controlling dust in a woodshop is always an issue. The bag collector included with the Porter-Cable PC60THP planer does only a moderate job of collecting the sawdust and chips produced by the planer. Replacing the dust bag with this…

0.8 MOD gear 60T (for the focuser wheel of Pentax 75SDHF telescope)

This is a 0.8 MOD gear 60T for the focuser wheel of Pentax 75SDHF telescope, which is used for focus automation via ONSTEP ASCOM driver.

0.8 MOD gear 60T & 65T (for 2.5" & 3" Feather-Touch focusers of Starlight Instrument)

This is a 0.8 MOD gear 60T & 65T for the 2.5" & 3" Feather-Touch focuser of Starlight Instrument, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing…

0.8 MOD gear 60T (for the 2" Feather-Touch focuser of Starlight Instrument)

This is a 0.8 MOD gear 60T for the 2" Feather-Touch focuser of Starlight Instrument, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing control, or…

Bumbag component for BigTreeTech TMC5160T Plus V1

A placeable component for the Bumbag Customizable Enclosure System . Find the product here . This model incorporates a modified version of the 3D model published by BIGTREETECH here .

BTT TMC5160T Pro AWD + MCU Board mounting bracket - Fixed Hole Spacing

All credit to Phantom16361 for the original design. There was a slight error in the hole placement of the 5160 Plus mounts. The picture with the bracket in blue is the original hole spacing. The one showing the yellow/tan color bracket is…

0.8 MOD gear 60T (for the orginal focuser wheel of Takahashi FSQ106N telescopes)

0.8 MOD gear 60T (for the original focuser wheel of Takahashi FSQ106N telescopes) , which can be applied for focus automation.

HTD 3M Pulley 40T & 60T, 5 mm D-Flat Bore – Printed & Tested

An HTD 3M timing pulley pair, 40 and 60 teeth, printed and run on an HTD 315-3M belt. Both 5 mm bores carry a D-flat under one M4 set screw in a captured nut, the 60-tooth pulley runs on six spokes, and both print their flanges in place.…

Chainguard 60T

This model is 1/5th of a circle going around a 60T chainring (130mm BCD). It fastens with any kind of metal wire that is twistable. Why not screws ? I tried a design with screws but there is little clearance, both from the dérailleur and…

Meepo Cyclone 3-Link HTD 5m 20mm 60T Pulley

Hub Meepo Cyclone, truck Meepo 3-Link (2025) Řemen Htd 5m 20mm Řemenice 25mm šířka Ložiska kola original Meepo pro 10 osu 6900 10-22-6 Ložisko Řemenice 16100 10-28-8 mm Šrouby 5ks 4x40mm Spacery original Meepo přiložené k truckům 10mm,…

60th birthday topper for Giant Twist Lock Present by 3D Printy

60th birthday topper for Giant Twist Lock Present by 3D Printy Attach this topper to the famous twist lock present box with a single M3x12mm screw. Optional you can add an M3 nut with a pause during the print which in my test was not…

TMC5160T Plus 4x Bracket for Annex Engineering Gasherbrum-K3

I'm running the XY motors on my Annex Engineering K3 at 48V, and I'm using BTT's external TMC 5160s (TMC5160T Plus) as the stepper drivers. I needed to mount them, and specifically, I needed enough room for an Octopus Pro (mounted…

Plug for Ormig 60T counterweight bolt holes

Simple model, doubt if anyone would ever need this unless you have a 60 or 100 ton Ormig crane :D but here it is anyway This is made to be printed in TPU

MellowFlyTMC5160TAQuadFanMount

4 fans

0.8 MOD gear 60T (for the original focuser wheel of the Takahashi FSQ85EDP telescope)

0.8 MOD gear 60T (for the original focuser wheel of the Takahashi FSQ85EDP telescope) , which can be applied for focus automation.

0.8 MOD gear 60T (for the original focuser wheel of the WO Z61-III telescope)

0.8 MOD gear 60T (for the original focuser wheel of the WO Z61-III telescope), which can be applied for focus automation.

Standfüße für LG DS60TR

Boxenständer für eine LG DS60TR 5.1 Soundbar Dieses Modell besteht aus 3 Teilen. Sie benötigen: 4x M4x16 Zylinderkopfschraube DIN912 2x M4 Heatinsert für den Fuss 10x Gummipuffer 10x3 Link:…

ERCF V2 Selector Power Drive 60T pulley Mod NEMA17

Only modified to use a NEMA17 stepper motor ## BOM: * cnc 60T pulley (2GT, always 2GT type) * one more 20T pulley ( the same type of the ERCF original design for selector motor) * 154mm belt, (2GT close loop) * nylong washer M5 0.5mm…

Cake topper birthday 50th / 60th / 70th deer

Deer trophy topper for the 50th / 70th birthday cake. I shared also the FreeCAD file of my remix. Remix of https://www.printables.com/model/617644-hunting-birthday-topper Notes: Extrude height: 2mm Bed plate: Satin Powder-coated Steel…

60T GT2 Pulley, 6mm belt width, 6mm bore

Designed GT2 timing pulley for my EXOS II EQ5 OnStep mount with following specifications -- Number of teeth - 60 Pitch - 2mm Bore - 6mm Belt width - 6mm The pulley has two slots designed to fit M3 hexagonal nuts to assist in shaft…

Meepo Cyclone 3-Link HTD 5m 20mm 60T Pulley

Hub Meepo Cyclone, truck Meepo 3-Link (2025) Řemen Htd 5m 20mm Řemenice 25mm šířka Ložiska kola original Meepo pro 10 osu 6900 10-22-6 Ložisko Řemenice 16100 10-28-8 mm Šrouby 5ks 4x40mm Spacery original Meepo přiložené k truckům 10mm,…

Micron R1 Printers for Ants (PFA) - Powge 60T Pulley Z Drives

This is a mod for the Micron Printers for Ants R1. The Powge 60T pulleys don't fit the stock Z drives, these do. NOTE: Dont forget to update the gear ratio in your configs! The stock micron configs assume 62 teeth. Changes: Screws moved…

BTT 5160T-Pro mount for 2 drivers

This is a simple mount for two 5160T-Pro drivers from BTT. Can be mounted on a panel or elevated.

Polia gt2 160T

BTT TMC5160T Plus dual DIN mount

Add option to mount across the DIN rail. BOM: 4x M3 8mm button head for modules (socket head also work) 2x M3 8mm socket head for DIN mount 4x M3 12mm socket head for fan bracket 8x M3 14mm socket head for fans

Herringbone 36T & 60T Gears

Name: Grady C. Part Name: Herringbone 36T & 60T Gears Section: VEXU POLY2 Purpose: Drivetrain Proposed Material: Needed by: Asap Comments: Gears for vexbot STL: provided Image: (provided)

BTT TMC5160T Plus Case with printable holes

Same as original but used the same trick voron parts use to make the holes printable

RTX 5060Ti

Printed label for GPU support. Can be printed on any 3D printer by changing the filament on the appropriate layer. It is best to use a 0.2 mm layer and change the color to white 4 layers before the end of printing and to green 2 layers…

Dynacord 60th knob

On old Dynacord amplifiers from the 1960s, the control knobs are often missing or damaged. This is a replacement designed to closely match the original knobs. If available, the original insert plate can be used; alternatively, an 18 mm…

Echo P021005581 Chainsaw Oil Cap / Echo P021005591 Chainsaw Gas Cap (CS2600,2700,310,260TES,350WES/TES,352ES,353ES,360TES,361WES/SH305S)

. Print Settings Printer: Don't matter Rafts: Doesn't Matter Supports: No Resolution: 0.1 Infill: 90 Filament: Any ABS Any Notes: Maybe need small resize x and y for shrinkage's compensation. Крышка должна накручиваться без усилий, но не…

TMC5160T Plus mount

A simple mount that can be clamped into alumumium profiles to hold the TMC5160T Plus in place. The Holder needs to be screwed and you have to solder heat inserts. After that you need to decide how you want to mount your drives. As you are…

BTT 5160T Plus DIN Rail Mount

I've created this model to save space in electronics bay. Use M3 heat set inserts for mounting

1/60th Scale MLP Engine Chamber Deluge Pipes

These Deluge Pipes attach to the walls of the MLP Engine Chamber available for d/l in my profile.

btt TMC5160T plus dual din mount

Mount for BTT TMC5160T Plus. Mount Drivers with 8 M3x12

BTT 5160T Plus quad mount

Cut copied mirrored pasted assembled. I dont know how to cad but cut copy paste worked here.

BTT TMC 5160T Plus DIN mount

Only 4 M3x8 bolts are needed. Does not need heat inserts. Just screw into plastic. You can use nuts instead of the fan mount if you don't install a fan. For fan only 4 M3x12 bolts are needed. Easy installation & printing, no supports.

BTT TMC 5160T Plus DIN base

補貨清單：@M3X8 FHCS *2 @M3X12 BHCS *8（適用於4010風扇*4）

BTT TMC 5160T Plus dual DIN base

M3X8 FHCS *4 @M3X8 BHCS *4 @M3X12 BHCS *12（適用於 4010 風扇*8）

CER-160/CER-160TR/EcoRocket Nano Vehicle

Vehicle developed by ARCA SPACE, model made in Blender. CER-160 is a rocket that can transport 3kg to 20 Km

BTT-5160T Plus step driver cooling fan mount

Cooling fan mount dock for BTT-5160T Plus step driver BOM axial fans3010 x1 or 4010 x1 two location to install the fan for open install or concealed install as pic some heat nuts 3*4*5/3*5*5 good luck and happy printing again

BIGTREETECH TMC5160T Plus w/Case DIN Rail Adapter

DIN rail adapter for use with BTT TMC5160T w/ Case Recommend using button head cap screws for mounting.

BTT 5160T Plus Quad DIN mount

The totally not overkill driver mount I needed a DIN mounting solution for my four drivers and I might have gone a little bit overboard… Supports both horizontal and vertical mount (100mm +-10mm spacing) utilizing the Voron DIN clip (…

Skateboard pulley (54T m3/60T m3)

Recommended material is (ABS/ASA/PC) 100% infil.

BTT TMC5160T Support for Din Rail

You can identify your version of the Stepper Driver by seeing if thedriver has R022 resistors, which is the v2 (the version that BTT should be shipping right now) or R512 resistors, for the v1 of them. Right now its only the holder but…

BTT TMC5160T Plus Case

A 3D printed case for the Bigtreetech TMC5160T Plus based on their CNC case. This is a relatively complex and thin print with fully supported holes that stays within the footprint of the board. This model supports the attachment of a 3010…

BTT TMC 5160T Plus dual DIN mount

Remix for din912 screws and fused inserts. Inserts m3*4*5 Screws m3*12 Screws m3*8