DIN mount for BTT Octopus pro + 4x BTT TMC5160t PLUS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple and effective DIN mount for BTT Octopus pro + 4x BTT TMC5160t PLUS
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 125
- Wydruki
- 1
- Wyświetlenia
- 745
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Here’s a simple and effective DIN mount for the BigThree Tech Octopus Pro with 4 x 5160T Plus stepper drivers.
In addition to holding the motherboard and stepper drivers, this mount also allows you to install 4 x 40mm fans to cool the stepper drivers. Additionally, there is an option to mount a cover over the motherboard, either without a fan, or with a 60mm or 80mm fan.
What needs to be printed:
- 1 x BASE
- 1 x FAN
- 4-8 x M3 x 30mm standoffs
- 2 x FlySuper8 DIN mount
Note: I strongly recommend purchasing standard M3 x 30mm standoffs rather than using the printed versions. They work as intended, but in case of breakage, there’s a risk of short-circuiting. Better safe than sorry.
The uploaded FlySuper8 DIN mountX2 has been taken from https://github.com/VzBoT3D – all credit goes to him.
The remaining parts are original, designed and modeled by me.
Feel free to share, remix, or do whatever you like with them, as long as you are respectful and credit the original source.
Enjoy!
Kasper - KH ENGINEERING