GEPRC MOZ7 GPS M10Q Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you have a GepRC Moz 7 frame kit, and a Gps with compass, the stock gps mount wont fit your GPS. This is made to fit.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 129
- Makes
- 1
- Views
- 584
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Made as a replacement for MOZ7's GPSmount, if you have a GPS M10Q model, 25x25 mm mount. There is a slit for strapping it down with a ziptie for extra security.
Made using fusion 360.
Printed on Creality CR6-SE. Not really suitable for TPU, But if you slow down your print speed it will mostly be fine.
Printsettings: TPU Filament
Nozzletemp: 225
Bed temp: 50
Speed Print: 40mm/s (both infill and outer layer)
Infill: 80-100 (actual model is 80%, but is slightly too flexible. May differ from TPU filament)
Retraction distance: 6mm
Retraction speed 60mm/s
Suppports: Yes. ( I have not tried without)
Not to be sold!