1 / 3
FlexiDinos JJ the Flexi Velociraptor / Deinonychus / Utahraptor print in place articulated dinosaur — image 1
1 / 3

FlexiDinos JJ the Flexi Velociraptor / Deinonychus / Utahraptor print in place articulated dinosaur

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

It's a bird! It's a lizard! No, it's … something that goes SNIKT!

Rating
4.939 / 5
Likes
248
Downloads
957
Makes
36
Views
7,374
Reviews
33

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Edit, 18. 6. 2026: Set the Model to free for all! Happy printing! If you want to support my work and see more FlexiDinos become a Club Member!


Edit, 14. 8. 2026: Massively reconstructed the model, improved over all stability and joints, added feathers to the tail. To keep things tidy and manageable the old model was replaced by the MOST 1:100 version. Edited cover image. Added MOST 1:100 description.


The following manual is completely optional. You don't have to insert any magnets if you don't want to. But it's definitely worth the extra step! Use the .stl or remove the pause in the .3mf before you start printing if you don't want to insert magnets.

MOST 1:100 explained

MOST stands for Magnetic Open Source Toys. 1:100 is the scale. These are the rules:

  1. 1 real meter = 1 toy cm

  2. Use ∅ 5mm × 2mm neodymium magnets

  3. North is always facing upwards

It's easy: 1 meter in the real world is 1 centimeter in the toy word. A 5 meter car becomes a 5 centimeter toy. A 2 meter tall hero becomes a 2 centimeter action figure. To ensure compatibility between all toys the north pole of the magnets always faces upwards.

It's like Gridfinity but for toys! You can read the long version here.

WARNING!

SWALLOWING MAGNETS MIGHT BE FATAL!!!

Magnets and 3D printed parts are in no way suitable for small children. They might break and leave sharp edges, so make sure the kids are old enough to know what they're doing! 

Also make sure you don't have a steel nozzle inserted as it might pick up the magnets while printing and ruin something.

Print instructions

1) Open the .3mf as project in PrusaSlicer, adjust settings according to your taste. Every pause is pre-dialled. Skip step 2) and insert the magnets as explained in step 3).

2) If you're more of a masochist tinkerer use the .stls, navigate to the according layers, insert a pause in the slicer (right klick on the slider at the according layer in PrusaSlicer).

3) Insert the magnets according to the screenshots below. North always faces up according to the orientation of the model – hence the different orientations for the inserts. Determine north as explained in this article. 

4) Get Thag the dino jockey / snack and start riding!

Thanks to all my club members for making this possible. If you like the model, consider becoming one yourself. 

If you want to support me without costs, tell your friends and share my models on your social media! <3

If you have questions and inputs get in touch! Happy printing!


AHH! Fresh meat!

It's everyone's favorite combat chicken. At 100% scale it's a 1:100 Utahraptor. So you can scale it to 50% to get a Deinonychus (not recommended with anything over a .25 nozzle and even that didn't give very satisfying results) or to 25% to get a velociraptor which makes no sense at all. They basically look the same.

I even watched a cockfight (Schwanzglied anyone?) on youtube to get in the mood to design this beast. Something I can't recommend to anyone because it's stupid, unnecessarily cruel, and surprisingly boring in the end. Since this was a dead end, I had to use my own imagination, like a caveman or something. Ugh!

So let's talk a bit more about the Schwanzglied. The last three joints on this model are designed to look like a peacock's tail. This is because the main design process was done in just two night shifts. I can't stand living an easy and happy life, so I decided to give myself a challenge by throwing away the whole tail design and managed to come up with something a bit more challenging for me as a designer and also for your printer as it is only attached to the print bed by a very small area.

This cost me the better part of last weekend where I had some time without my wife and kids and otherwise would have come up with stupid ideas, (I built this slingshot a while ago, hurt myself badly on the 3rd try and just rediscovered its a lot of fun to shoot it if you know how to use it) so its probably for the better for everyone. Thanks Deinonychus!

So far my printer has managed to get it out in one piece even in PLA but I recommend printing this in PETG as it has much better bed adhesion.

Time to say thank you!

When I first released Günther, I had no idea that there would be such a demand for flexi dinosaur models. When I decided to start selling my models on Printables, I never dreamed that I would have so many supporters willing to pay for my models. So this is for everyone who joined my club or paid for a model they bought on the store: YOU ROCK and I owe you a huge thank you from the bottom of my heart! Keep on rocking and happy printing!

I can't stress this enough, so I'm going to write it down here: FlexiDinos are in no way suitable for small children. Parts can break off and leave sharp edges, so make sure your children are old enough to know what they're doing before letting them play with FlexiDinos!

//////////////////////////////////////////////////

If you like this model, I have created a lot of other cool FlexiDinos. You can support my work and get exclusive stuff by becoming a Club Member.
//////////////////////////////////////////////////
You want a new model for free every month that is normally hidden behind the paywall? Check the FlexiDinos Model of the Month regularly!

//////////////////////////////////////////////////

Tags