Tektro Auriga Twin disc brake piston seal
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brake Piston seals for Tektro Auriga Twin bicycle disc brake.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 0
- Views
- 429
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Use at own risk! Bicycle brakes are critical safety features, tinkering in the shown way definitely voids your warranty and failing brakes can be fatal!
I didn't expect this to work, but it does!
I had a leaking Tektro Auriga disc brake caliper, which upon opening showed heavy use on one of the piston seals. The brakes, being already a little outdated and a mirrored version are hard to find as replacement, so I modeled the seals and printed them in TPU (https://www.dasfilament.de/filament-spulen/tpu-1-75-mm/417/tpu-v2-filament-flexibel-1-75-mm-schwarz-800-g?c=27)
after installing and refilling the brake caliper i was stunned that the brake has a good pressure point and the auto adjustment of the pistons is working. TPU is elastic, mineral oil and wear resistant, so I expect this repair to work for quite some time. But the original seals are definitely a lot softer than the used 94A TPU, so it might be worth trying softer TPU.
The seals have a slightly larger diameter than the dedicated rings in the brake caliper, so squeezing them in is a bit tricky. I used a small screwdriver. When the piston is pushed in the seal, it should need firm pressure but not too hard for pushing by hand.