Rugged Box for Batteries / Fully Printed /21700 & 18650
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a box for a total of 4 batteries of type 21700 or 18650. Both boxes are similar except for the diameter of the b
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 269
- Makes
- 0
- Views
- 1,053
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a box for a total of 4 batteries of type 21700 or 18650. Both boxes are similar except for the diameter of the battery holder and the height of the box.
Everything was printed in PLA and the guide for the hinges is also a strand of 1.75mm PLA. This can be fused to the ends with a soldering iron if required.
The “seal” is made of TPU 95A, but is also rather optional, even without it the box works without any problems. However, it is less protected against moisture.
This means that your batteries are also separated from each other when traveling by air and can therefore be stored safely
The Differenz betweet 21700 and 18650 is only Diameter of Holes and Height of the Box. Therefor i only print the Box to test 18650 Profile