Gopro Tripod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a (almost) print in place gopro tripod. You will need glue and a M5 nut and ofcourse a (gopro) thumb screw.
- Rating
- 4.855 / 5
- Likes
- 482
- Downloads
- 3,075
- Makes
- 57
- Views
- 12,515
- Reviews
- 55
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print both parts. I used PETG.
You must not use support for “gopro tripod part 1”
For the second part you can use support but only on the underside (I used “support on buildplate only” and increased “XY separation between an object and its support” to 4 mm).
After printing you can move the tripod stands (you might need alittle bit of force).
Glue the two parts together.
Put the nut in the groove and now you can mount your gopro on it.
If you enjoy the print and want to buy me a coffee…Here's the link:
https://buymeacoffee.com/winter0is0coming
Disclaimer: gopro is in stl-files not included :-)