Fixation for (un)original Prusa drybox - all in one remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fixation for the (un)original Prusa drybox on top of original enclosure, which lets you take the box off easily.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 81
- Makes
- 4
- Views
- 406
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
The (un)original Prusa drybox is tightened enough so that lifting the top panel (hinged lid) doesn't move the box. However it's easy to take it away when you really need to. Just lift the drybox straight up.
For me this let's me do small things from top with the MMU, but if I really need to open the panel completely, there's not enough space behind the printer so that the drybox is in the way. With this remix I can take it off easily without unscrewing anything.
There are 2 versions with varying inner diameter for the enclosure top panel bores which lift up. I use 4.1 which is a tight fit and let's me press the fixation over the bore rims and the fixation is already pretty tight in shape. However that might not work for others so I added a version with a slight increase of this diameter (4.2) in case it doesn't fit well.
I printed on MK4 in PETG, 0.4 nozzle and 0.2 layer height, 3 perimeters, 15% infill, no support, no brim.
The fixation fits on the MK4 sheet when placed diagonally.
Bill of Material
- 6 M3x8 screws (or M3x6 depending on your bolt head, how far you can screw it in).