1 / 9
Fixture Knob Nut and Bolt
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Knob design for all kinds of fixtures and tools
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 43
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This knob is for a dado jig that I'm building. It allows clamping of the two parallel boards that guide the router. It uses a 5/16" carriage bolt and nut. the nut is pressed into the cavity. It should be tight as is but can be glued if needed. I used PETG for my knob.
I've also added a design for a larger knob that I made for my metal bandsaw tension control. It uses a 10mm hex head bolt.
These two knobs can be scaled to fit whatever size bolt or nut you need. I scaled the 10mm version down to work with the 5/16" bolt. I then changed the hole diameter.