1 / 1
Playmobil PM-18 9404 sportive car roof — image 1

Playmobil PM-18 9404 sportive car roof

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

2 roof versions for the Playmobil PM-18 9404 car

Rating
0 / 5
Likes
7
Downloads
41
Makes
0
Views
594
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial

My son demanded one of his Playmobil cars to have a roof as otherwise it may get wet when it's rainy.

This has proven to be a little challanging as the roof has curvatures in 2 directions and there is no step on the lower edge of the remaining structure for it to not fall into the car.

This was solved by

  • printing it on the side (requires supports for the fillets of the corners, also a support structure had to be integrated to stabilize the print so it won't tip over when printing)
  • adding a “roof scoop” at the front and a spoiler at the back to keep the roof from falling into the car

Available prints

  • regular one (displayed in the foto)
  • more sportive one, with big roof scoop and big spoiler

Printing instructions

  • 0.1 layers to get a smooth texture
  • no infill at all required
  • add support blocker for the roof scoop (front)
    (works nicely even without supports, it's small enough)
  • add supports from build plate

Post processing

Clip off the support structure with a side cutter.


 

Tags