1 / 3
Yaesu FT-70D SMA-BNC adapter cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cover for the SMA-BNC adapter for a Yaesu FT-70D
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 49
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small sleeve to protect and support the SMA to BNC adapter for the antenna on the Yaesu FT-70D transciever. Printed with a 0.2mm nozzle in mind, might be possible with a 0.4 mm nozzle as well, i have not tested it.
You might want to add a bit of kapton tape on the knurled part of the BNC to prevent it from rotating once mounted.
Printed mine in PETG.
Adding a brim might help with adhesion as there is a very small contact area with the bed. No supports needed.