Adjustable Phone Mount for Desk
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tool to help you stabilise your phone, while you work.
- Rating
- 4 / 5
- Likes
- 14
- Downloads
- 80
- Makes
- 1
- Views
- 804
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This phone mount is great if you need to make stable videos or have consistent photo angles. There are 3 degrees of adjustability: phone orientation, swing arm angle and desk size.
It suits desks/mounting points up to 55mm thick. The swing arm is adjustable in 15 degree increments, allowing for precision and freedom of movement. You can rotate your phone to whichever orientation you want.
You will need 2 rubber bands, folded over, to hook onto the pins. For the swing arm, place the rubber band onto the main swing arm part, then feed it through the hole below, then using a toothpick or something similar, pull the rubber band through. Insert the locking pin into the swing arm and hook the rubber band onto the pin. Look at the instructions in the images for more clarity.
Optional: print the phone pads out of TPU and glue them onto the phone mount, where the phone will touch.