1 / 2
T-Stick Powerchair Hockey
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable T-stick for Powerchair Hockey
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 35
- Makes
- 0
- Views
- 515
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recommend printing from FLEX with hardness 98A. It has worked well for me to vary the number of perimeters at different heights (see my G-code).
- After you have printed both pieces, insert the blade into the wings. It's a bit stiff, so don't be afraid to use some force and maybe even heat the wings a bit. Secure the blade in the wings with small screws. Each side of the wings has one hole for one screw. The screws are not necessary for the T-STICK feature, but according to Powerchair Hockey rules, attaching the wings to the blade is necessary with metal.
- Insert M5 melting nuts into the upper holes on the wings (I bought these)
- Finally, use the long screws (or threaded rod) M5 to attach the T-STICK to the steel you are attaching to the powerchair.