1 / 2
T-Stick Powerchair Hockey
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable T-stick for Powerchair Hockey
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 515
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recommend printing from FLEX with hardness 98A. It has worked well for me to vary the number of perimeters at different heights (see my G-code).
- After you have printed both pieces, insert the blade into the wings. It's a bit stiff, so don't be afraid to use some force and maybe even heat the wings a bit. Secure the blade in the wings with small screws. Each side of the wings has one hole for one screw. The screws are not necessary for the T-STICK feature, but according to Powerchair Hockey rules, attaching the wings to the blade is necessary with metal.
- Insert M5 melting nuts into the upper holes on the wings (I bought these)
- Finally, use the long screws (or threaded rod) M5 to attach the T-STICK to the steel you are attaching to the powerchair.