Sim Button / Switch Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
made this extra button/switch box for dcs.. with a small arcade stick for slew control or something else XD
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 99
- Makes
- 2
- Views
- 1,050
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
made this extra switch box to use in dcs.
you need
1x cheap arcade usb encoder board got mine from ali express was about 4,50 euro
4x a toggle switch ( I bought 2 with a cover)
5x a 12mm button
1x 16mm key switch (or extra 12mm button )
1x cheap arcade stick 9x m3 bolt
4xm2 10mm bolt for the board
2x m3 countersunk bolt to fasten the stick
should be easy to print no supports needed.
biggest part is the base it's 223x191x51 mm so should fit on most printers
(also posted a 2nd version of the base with a 12mm hole at the side so you can switch between the modes for the stick and still have 12 buttons at the top)