Counting matching models…
Basado en mi modelo, adaptado a los mandos a distancia. dos modelos con diferentes anchos Fotografías de modelo laminado con @ideamaker con textura. https://www.printables.com/es/model/250790-toothbrush-holder
I had been asked to create a stand for remote controls. This is the result.... I had to print it for some friends as well. So, some of you may find it usefull, too. Feel free to adjust it to your needs. Print Settings Printer: BLV mgn…
I needed storage for the remotes and PS4 controller, so I modeled the case for the remotes and merged it with the PS4 controller holder found on printables.com. To design the remote control storage, I took inspiration from @Philou's work.…
This is a box intended for the control unit and control buttons for the thunderbolt 1003 and 3t 22 Red LED. : https://www.hadex.cz/k453f-kontrolka-12v-led-cervena-do-otvoru-10mm/ Orange LED. :…
Hej! I made a controller for educational use, ship handling simulations or even radio controlled vessels. As simple as it is the whole project consists of three groups. 2x tiller, 2x throttle and 1x button panel. Tiller: 1x Tiller Base 1x…
A table side remote control holder. get a more organized coffee table look and know where the remotes should be :D created on fusion360 and attached the f3d file. PS: I have a glass bed, printing it with a brim is what I did. Print…
I made this remix really quick to fit it on a HSS (Humbucker, Singlecoil, Singlecoil) classic Fender stratocaster (or Squier).
Filament: PLA + Infill: 10 % Hight layer 0.36 mm Not support Hotend: 215 °C Bed: 50 °C
For full project details visit the GitHub page . No supports needed. Infill at 20% Print one of each part for full assembly Design uses M3 screws anything around 6mm length should be fine. Threaded inserts are highly recommended!! HAM is…
The scad has yet to be finished, the fixing holes do not stay in the center if enlarged. but you can still try to satisfy your uses. The STL is designed for this: AMZN it:…
Hub adapter model to fit a 70mmX6 quick relase to your Cube Controls wheel. Universal 70mm PCD on one side and 50.8 PCD from Cube Controls on the other side. You need M5 countersink head bolt, 3 bolt on each side should be enough but you…
I wasn't satisfied with the Logitech Saitek Throttle quadrant and wanted something that more closely simulated the experience of flying a Cessna 150/152. So, taking inspiration from other projects (including this one ) I set about…
In an effort to cleanup the look of the Newmar Mountain Aire dash, and to facilitate a double DIN radio, I modeled a replacement fascia to condense all HVAC controls onto a single panel. The temp controller, zone selector, and temp sensor…
Print Settings IMPORTANT: This is designed for 21mmx42mm controllers. You can scale it for longer controllers. Rafts: No Supports: No Resolution: 0.15
Simple holder LED remote controls with a width of 40x86x7mm. I recommend using PLA filaments and setting the print to 0.2mm layer hight. It is recommended to attach the holder to the wall or furniture with double-sided adhesive tape.
I created this for first generation trackers?sidekicks/Suzukis heater A/C control knobs to be press fit replacements for stock lever knobs. Best done on resin printer but can be done on fdm with small enough nozzle and the right settings…
Hub adapter model to fit a 70mmX6 quick relase to your Cube Controls wheel. Universal 70mm PCD on one side and 50.8 PCD from Cube Controls on the other side. You need M5 countersink head bolt, 3 bolt on each side should be enough but you…
This is a remix I made based off the TeachingTech xTouch enclosure mod to go over the P1S/P1P control screen. I didn't want to use the xTouch in the original, but I had an old Pixel 3a that I now have sitting in the cradle. Fits over the…
uchwyt na pilota można powiesić na ścianie za pomocą rozwiązania lub gwoździ, polecam wydruk z podpórkami
This is for the awkward shaped blank panel at the side of the heater controls on a non-satnav LC100 and possibly LX470 and other toyota models. Mirror the model for the RH side if required. This is a remix of the “blank” which is on my…
Replacement control box for the WEN 33013 that contains cutouts for a tachometer display and probe. I used a cheap tach from amazon that could wired to the mill power switch ( https://a.co/d/1xcFISM ). You will need to have a basic…
Mount for Ignition Controls button box with 100x135mm bolt pattern. 80mm bolt spacing on profile mount. Category: Video Games
Support de télécommande tournant sur 360° Ce projet comporte 3 fichiers. Base.3mf Entretoise.3mf Bac.3mf le fichier support télécommande complet , regroupe tous les fichiers. Disposition sur la plaque d'impression: Paramètres d'impression…
This is a replacmnt battery cover for Delta Controls eBCON controller. Redesigned from scratch. Orginals sometimes break (latches), or as in my case get lost…. Its hard to belive but maybe someone will need it, too. I print them with PLA…
This practical desk stand is specially designed to securely hold the Delta Controls eZNS thermostat (typically wall-mounted) upright on a table or desk. Ideal for temporary installations, demonstrations, or office setups where wall…
Suporte para controles Quest 3 com capa de silicone. Neste suporte os botões laterais não são precionados. do not press the side button. This 3D model is a remix from: https://www.printables.com/model/898174-meta-quest-3-wall-holder
This is a new take on the 71-74 B-Body Rallye Dash. It adds 2 additional gauge pods in the Radio Area and allows mounting of Aftermarket gauges. Requirements: If converting from a standard dash car, the wiper switch wires will need to be…
I wasn't satisfied with the Logitech Saitek Throttle quadrant and wanted something that more closely simulated the experience of flying a Cessna 150/152. So, taking inspiration from other projects (including this one ) I set about…
Custom made mount to hold a rocker switch, a 12v USB adapter and a Raymarine P70Rs Autopilot Controller. I glued some spare vinyl to the bracket before installing the electronics to make it match the existing decor
I made a cover for the touch screen, control knob and USB stick as my 1 year old likes to play with them when he gets in my office and a print is going! There is clearance at the top of the cover to allow the door to open still. The cover…
No special printing requirements. Standard settings can remain unchanged. You can use narrow strips of double-sided adhesive tape to attach it. Please don't just drill into the window. :p
I took the original “square” icon and duplicated it. Moved the copy up and to the right, sunk it by half of its thickness, and then used negative parts to exclude in interior parts. Then I merged everything to end up with one assembly.…
This compact under-table storage tray is designed to be mounted underneath a coffee table, desk, or similar surface. It is ideal for storing remote controls, small accessories, or everyday items while keeping the surface clean and…
This Holder fits a Roku TV Phillips remote. Will most likely fit most small remotes. Make sure the orientation of the print is as shown in the photo! Holder pocket size: 43 × 23 × 50 (L × W × H). If you need any assistance or require a…
Often when reaching into my Jeep Grand Cherokee WK2 I would hear the faint buzzing of the seats lumbar position changing and realize I was accidently touching the controls. This is a simple gaurd around the control so that it takes a…
In an effort to cleanup the look of the Newmar Mountain Aire dash, and to facilitate a double DIN radio, I modeled a replacement fascia to condense all HVAC controls onto a single panel. The temp controller, zone selector, and temp sensor…
Wall-mounted holder designed to store up to three devices. Suitable for TV remotes, air conditioner remotes, smartphones, and other compact devices. Can be mounted on walls, furniture, or near a workstation. The two-part adjustable…
I have bought this kit from aliexpress ( https://www.aliexpress.com/item/1005007953528214.html ). i have fitted in my corsa and made an adapter to fit the 2 controls, along with the ciggarete lighter!
This mounting plate was modeled to be the base for a drone remote control for my bike. I didn't want to mount the remote control on the bike handlebars because I don't have enough space and it just didn't feel right.... ;-) So I decided…
This wall plate allows you to neatly place two Chamberlain (Or LiftMaster, or Sears since they are all made by the Chamberlain group) wall control panels side by side. It has channels on the back side to hide the wires. You can use a…
TR7 heater control knob Print the hot/cold one twice paint red/blue arrows on one and white on the other Updated as I copied from a broken one and it didn't fit Category: Automotive
Printed in PLA 0,2 -0,4mm (17 - 10 hours to Print) 20% infill, no Support needed , 2 Top and Bottom layer.
Držák dálkových ovladačů je rozdělen na 3 díly. Snadný tisk bez podpor na Prusa MK3. Doporučuji nejdříve přišroubovat na zeď, potom přilepit přední díl.
This remote control stand brings a touch of design to your room It is used for three controls, according to the need and thickness of your controller, you can adjust the height of the chain links Inspired by the Relaxing soap model :…
I made my own Bowden cables with 2mm PTFE tube (inside diameter 1mm) and 0.8mm braided stainless steel cable. I use these cables to control features like eyelids, eyebrows, ears, and eyes for 3d-printed puppet heads. These parts were made…
cgenco has a great design to keep the tension screws from jumping out every time you open up the MMU2. If you like me and flipped your controls to the bottom this wont really work. So I made a few edits to fit on the unit when using…
If you want to use your Rebook ZPower fixed bike with a standing desk, this will allow you to mount the controls and electronics at a lower height. You obviously lose the handle bars and with that the pulse meter, but I rarely use those…
This design was created from scratch to match my bedside table shelf (18cm) In addition I've designed a small optional headset hook that hang on the remote-controls 'pocket' The headset hanger is better printed on the side The remote…
This is an open-source vernier-style throttle for use with flight simulators! Build Documentation: ( https://create.arduino.cc/editor/vince_prints/26fd18d3-42d0-418f-9d31-a8dba8ad6354/preview ) Video Demo and Build Guide: CadetYoke:…
I made my own Bowden cables with 2mm PTFE tube (inside diameter 1mm) and 0.8mm braided stainless steel cable. I use these cables to control animatronic features like eyelids, eyebrows, ears, and eyes for 3d-printed puppet heads. These…
Holder for 3 remote controls. The mount is 16 mm wide. It may be more convenient to print version V2.1 - to eliminate the possibility of knocking down the legs. The support data is then easily removed with a stationery knife. I used PETG…
This adapter allows you to use potentiometer knobs Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 100 Infill: 100 Filament: PolyMaker PETG Category: Automotive
It's a wallholder for 3 remotecontrolls. two bigger ones on the back side an on the front a smaller one for an AppleTV Siri Remote. Hole sizes: 52mm x 26mm 38mm x 12 mm
A box designed to store less frequently used remotes in a cabinet, where they are neatly organized
Hallo, ich habe hier einen Drehknopf für meine Buderus- Heizungssteuerung erstellt. Er passt auf die Steuerung, einer MX300 Wärmepumpe und auch auf ältere Geräte, wie die Logano G125. Das Modell habe ich mit PETG, 0,20mm Layerhöhe und…
Allows addition of buttons aligned to two other buttons on the panel. Made for TMNT Arcade 1Up but should work with other panels.
We have smart lighting in the apartment and do not use our light switches. We don't want our guests to accidentally press the light switches, so we came up with covers to go over them. This is what we've come up with. The base is always…
If you also need 2 LED lighting remote controls for lighting reasons, this model may be something for you. The remote controls are always to hand and in the right place (provided you use the wall bracket). However, the wall bracket is not…
Holds 4 different size remote controls: - 2.5 x 5 x 21.5~ cm - 2.5 x 5 x 21.5~ cm - 3 x 5 x 14~ cm - 2 x 5 x 11~ cm Text on left side: “Remote controls” + Boxer dog logo on the right side.
If you do like this project, please press ‘Like’ above. Thanks. Easily build your own custom LED Neon Signs with Alexa, Hue and App integration. Simply follow this detailed, step-by-step guide. In today's project, I'll show you how I made…
This stand houses three remotes.
I added two encoders to my Cube Controls Formula Sport wheel and wanted the knobs like the originals but can't find them, so I designed them from scratch. There are two files, one for the original encoders and one for the ones I added,…
A stand/organiser for one AppleTV remote and one sunrise TV box (Switzerland) remote. Tischständer für eine AppleTV- und eine sunrise-TV-Box (Standard für sunriseTV in der Schweiz und baugleiche) Fernbedienung.
An adapter for Virpil Controls' VPC flight stick bases to mount them on 8020 profiles. It was designed for the WarBrd base since that is the one that I have but it should work for the MongoosT-50CM2 as well since they share case…
Someone ran into mine and cracked the mount I had. Ended up creating a new one that is very close to the original, but with a few mods to make it more stable. Printed with supports, but they easily broke off.
I created this to mount the Kyber board within my astromech. More details on Kyber can be found in the Kyber Control Systems Facebook group. Mounts to board via M3 screws and provides standoff mounts for board. Photo of mounted Kyber…
The most Royal and functional remote control holder ever! :) Features: Holds 4 different size remote controls: - 2.5 x 5 x 21.5~ cm - 2.5 x 5 x 21.5~ cm - 3 x 5 x 14~ cm - 2 x 5 x 11~ cm 3 slots to hold pens 1 slot to hold toothpicks (or…
To remedy the lack of layout underneath my arcade control panel, I designed this items to save some space for the USB PCB's that have “EG STARTS” etched on its silkscreen. This way I was able to upgrade the cabinet from a four-button…
Store all of your remote controls with this modular system
Modified the original model ( https://www.thingiverse.com/thing:683369 ) so that it can be printed in 3 pieces and glued together afterwards. This way the printed hinges are much stronger. Print Settings Printer Brand: Ultimaker Printer:…
ENGLISH: This adapter frame has been specially developed for Zigbee remote controls, such as those from Paulmann or YPHIX, which can be mounted in a standard 55 mm frame from the various system manufacturers (JUNG, Gira, Busch-Jäger,…
LED Light Remote Holder: Organize Your Lighting Controls with Ease Product Description: The LED light remote holder is the perfect accessory to keep your LED light remotes organized and easily accessible. Designed to fit the remotes for…
I use this handle to push or pull on two Bowden cable - this controls the eyelids or ears of my hand-puppets - simple cable animatronics. The springs keep the cable in a neutral position when I do not use it.…
While shooting extended time-lapses with my phone, I often need to connect a power bank. To address this, I've designed a customizable, parametric mount that easily snaps onto any vertical rod or shaft. This model is specifically…
I upgraded my OMTech K40+ to the Liberty Controls AIO Air Assist/Fan Controller. As I looked at the K40+ controller board, I found that EX2 pin would go from ~5v when the machine is doing nothing to 0v when the laser head was moving. The…
