1 / 8
K40+ Air Assist Panel for Liberty Controls Upgrade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a upgrade to the K40+ to the Liberty Controls AIO Air Assist and Fan Controller.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 33
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I upgraded my OMTech K40+ to the Liberty Controls AIO Air Assist/Fan Controller. As I looked at the K40+ controller board, I found that EX2 pin would go from ~5v when the machine is doing nothing to 0v when the laser head was moving. The setup leaves the LOW air assist on all the time and turns the HIGH output air assist on when cutting (or framing/moving the head). This is NOT controlled by Lightburn in any way.
The steps and diagrams for what I did is included in the PDF.