1 / 4
spherical paragliding break handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
provides a better feel of the wing in the hands
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 53
- Makes
- 0
- Views
- 572
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
This design is installable without the need to untie the brake handle and does not damage your lines but the installation is a bit tricky.
you will need two M3x14mm hexagon socket head cap screws and two M3 nuts.
to insert the nuts I used a soldering iron as in the picture :
To prevent the sphere from sliding on the line, I wrapped a piece of fabric between the line and the sphere.
To print it you will have to activate the brim parameter and set a large brim width so that the print sticks to the bed :
