Motion Sensor Cover / Bewegungsmelder Abdeckung
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.36 – €1.66 net (excluding VAT)
For file: BW cover_0.4n_0.2mm_PETG_MK4IS_1h15m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.51 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 1.25 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cover to protect the motion sensor from splash water when mounted on a rough plastering wall
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
The motion sensor on my garage unfortunately didn't last longer than 2 weeks until it got fried, eventhough it was IP44 rated and for outdoor usage.
Reason was that during heavy rainfall, spalsh water was running down the rough plastering wall and getting inside the sensor which eventually shorted the sensor and the relay.
As those parts are not cheap and I didn't want this to happen again, I made this cover to protect the sensor from splash water.
It's mounted above the sensor with silicone and 2 screws, so all the water coming down the wall will no longer be able to get inside the sensor.
Working great so far so thought I'd share it with you guys, in case someone is having the same problem like I did :-)
Printed in Prusament PETG
IS Structural 0.2
15% Gyroid infill