Rhombus Strip Spacer for Fence or Facade Mounting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Rhombus Strip Spacer designed for the easy and precise mounting of rhombus slats on fences or facades.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 47
- Makes
- 0
- Views
- 328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introducing a versatile Rhombus Strip Spacer designed for the easy and precise mounting of rhombus slats on fences or facades. This spacer ensures consistent spacing between slats, enhancing both the aesthetic appeal and structural integrity of your project.
There are two spacers.
Both of them where designed for these slats:
68 * 27,5 mm with a 15° angle and prerounded corners.
Screw Guide
The simple one is a spacer and guide to place the screws consistently at the center of the cross slat. This one is made for 30*50 mm construction slats.
“Helping Hand”
The second one is to fix the rhombus bars in position while screwing them down. Just stick it to the bar below and stack the next bar on top of it. This is especially helpful if you are mounting them alone without a helping hand.
I usually used two or three of the helping hands to hold the rhombus bar in place and use the screw guide to screw them down.
Print Settings:
- Nozzle: 0.4 or 0.6 mm
- Layer Height: 0.4 mm
- Material: PETG
- Perimeters: 4
- Infill: 15%
The provided STEP and STL files will help you get started with your print or remix =)
Happy printing!