1 / 5
IKEA GNEDBY shelf lifting pegs / raising pins for Blu-Ray disc compartments
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raises a shelf by approx. 4 mm. Will make room for another row of Blu-Ray disc cases at the bottom of the rack.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 57
- Makes
- 0
- Views
- 359
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
When using the IKEA GNEDBY rack for blu-ray discs and placing the shelves on the pre-punched holes, the bottom compartment will not be high enough to put the cases upright.
Raising the shelf by just a few millimeters with these slim pegs will solve this issue without blocking the corners.
Single pegs may be printed without supports at 0.1 mm layer height.
Be careful when printing multiple pegs at once, the nozzle might knock them off when moving around.